100% French Product
Alya – Structure for dining table
from
489,00 €
You already have a tabletop and are looking solely for a table leg? You've come to the right place!
Very minimalist, the Alya table leg with structure will give your table a refined and very elegant design.
All specificationsEverything you need to know
Learn more about your product
Made in France
Quality manufacturing in steel, welded and assembled in our workshop next to Angers.
Each table leg is manufactured by hand with the greatest care, we use thick steel with robust assemblies.
Our products are designed to last several generations. Our first priority is our customers’ satisfaction.
For rectangular or oval top delivered fully welded no assembly required.
Dimension
MULTIPLE DIMENSIONS POSSIBLE:
(depending on the size of your tabletop)
Regarding the length of the structure: We recommend choosing it 40 to 50cm smaller than your tabletop.
Regarding the length of the structure: We recommend choosing it 20 to 30cm smaller than your tabletop.
For example:
For a tabletop of 200x90cm
–> We recommend a structure of 150x70cm
For a tabletop of 270x100cm
–> We recommend a structure of 220x80cm
FOOT HEIGHT:
Several heights available depending on the thickness and material of your tabletop.
A finished dining table (foot + tabletop) should measure between 75 and 77cm.
STEEL PROFILE USED:
The structure is manufactured at your choice with a rectangular tube of 50x50mm or 60x60mm
The Alya structure can support 300kg regardless of the version chosen.
Fixing the top
– For wooden tops: The structure is drilled which allows you to screw the foot into the top. We provide hinge screws.
– For stone tops: You can glue your top directly onto the foot structure.
– For glass tops: You can apply small anti-slip pads to the foot structure and place your top on top.
Protection of your floor
Small adjustable plastic feet are screwed under the feet.
The feet protect your floor and allow you to secure the table perfectly. You will be able to slide your table across the floor effortlessly, and without damaging your tiles or your parquet flooring.
Finishes
Powder coating: Your foot will be covered with a powder of your choice colour, then placed in an oven at 200 degrees creating a slightly textured, uniform and very solid coating. Powder coating is non-toxic, non-polluting and long-lasting.
RAL of your choice: If you choose this option, you must tell us the colour or RAL chosen when validating your order (example: RAL 7016, RAL 7021, RAL 2100, RAL 2525 etc..)
Delivery
The structure is entirely welded so not dismantlable, it will be carefully packaged on a pallet and once well protected, the pallet will be entrusted to the Geodis carrier, who will deliver your table base by appointment.
A question?
If you would like a custom size, simply contact us.
Testimonials
