100% French Product
The monarch – Structure for dining table
from
489,00 €
Do you already have a top and are you only looking for a table base? You've come to the right place!
Very refined, the monarch table base will give your table a sober and very elegant design.
All specificationsEverything you need to know
Learn more about your product
Made in France
Quality manufacturing in steel, welded and assembled in our workshop near Angers.
Each table leg is manufactured by hand with the utmost rigour, we use thick steel with robust assemblies.
Our products are designed to last several generations. Our first priority is customer satisfaction.
For rectangular or oval tabletop delivered fully welded no assembly required.
Dimension
MULTIPLE SIZES POSSIBLE:
(depending on the size of your tabletop)
Regarding the length of the structure: We recommend choosing it 40 to 50cm smaller than your tabletop.
Regarding the length of the structure: We recommend choosing it 20 to 30cm smaller than your tabletop.
For example:
For a tabletop of 200x90cm
–> We recommend a structure of 150x70cm
For a tabletop of 270x100cm
–> We recommend a structure of 220x80cm
LEG HEIGHT:
Multiple heights available depending on the thickness and material of your tabletop.
A finished dining table (legs + tabletop) should measure between 75 and 77cm.
STEEL PROFILE USED:
The structure is manufactured to order with either a 60x30mm or 80x40mm rectangular tube
The monarch structure can support 300kg regardless of the version chosen.
Shelf attachment
– For wooden tops: The structure is pierced which allows you to screw the foot into the top. We supply hinge screws.
– For stone tops: You can glue your top directly onto the foot structure.
– For glass tops: You can apply small non-slip pads to the foot structure and place your top on top.
Protection of your floor
Small adjustable plastic feet are screwed under the 4 feet.
The feet protect your floor and allow you to level the table perfectly.
You will be able to slide your table across the floor effortlessly, and without damaging your tiles or your parquet.
Finishes
Powder coating: Your foot will be covered with a powder of your choice colour, then placed in an oven at 200 degrees creating a slightly textured, uniform and very solid coating. Powder coating is non-toxic, non-polluting and long-lasting.
RAL of your choice: If you choose this option, you will need to tell us the colour or RAL chosen when you validate your order (example: RAL 7016, RAL 7021, RAL 2100, RAL 2525 etc..)
Delivery
The structure is entirely welded therefore not dismantlable, it will be carefully packaged on a pallet and once well protected, the pallet will be entrusted to the Geodis carrier, who will deliver your table base by appointment.
A question?
If you would like a custom size, simply contact us.
Testimonials
