100% French Product
Central foot The original – For dining table
from
359,00 €
Do you already have a top and are you only looking for the table foot? You're in the right place!
With its angles in all directions, The original will dress your top with delicacy.
All specificationsEverything you need to know
Learn more about your product
Handmade in our workshop
High-quality manufacturing in steel, welded and assembled in our workshop near Angers. Create a modern dining table with unique design thanks to our high-end metal base.
Each table leg is handcrafted with the utmost precision; we use thick steel with robust assemblies.
Our products are designed to last several generations. Our first priority is customer satisfaction.
A single unit, ready to install
The original is fully welded: you receive it in one solid block, with no assembly required. No bolts to tighten, no instructions: all you need to do is install your top.
It is compatible with round or square tops, in wood, stone or glass. It can support up to 300 kg, regardless of the version chosen.
Dimensions
Which length should you choose?
Choose the length of your Mikado foot based on the dimensions of your worktop.
| Worktop length | Foot length |
|---|---|
| Up to 190 cm | Version 1 Length: 100 cm on the ground and 140 cm under the worktop Width: 70 cm on the ground and 30 cm under the worktop |
| From 195 to 220 cm | Version 2 Length: 120 cm on the ground and 160 cm under the worktop Width: 80 cm on the ground and 40 cm under the worktop |
| From 225 to 250 cm | Version 3 Length: 140 cm on the ground and 180 cm under the worktop Width: 80 cm on the ground and 40 cm under the worktop |
| From 255 to 300 cm | Version 4 Length: 160 cm on the ground and 200 cm under the worktop Width: 80 cm on the ground and 40 cm under the worktop |
Which height should you choose?
A finished dining table (foot + worktop) should measure between 75 and 77 cm.
| Worktop thickness | Recommended foot height |
|---|---|
| From 20 to 30 mm | 73 cm |
| From 30 to 60 mm | 71 cm (standard) |
| From 60 to 80 mm | 69 cm |
| More than 80 mm | 67 cm |
Which steel section should you choose?
The steel section mainly influences the style and visual presence of the base frame. It has no impact on the weight supported by the base frame.
| Worktop dimension | Recommended steel section |
|---|---|
| Up to 170 cm | 60 × 30 mm |
| From 180 to 220 cm | 80 × 40 mm |
| More than 220 cm | 100 × 50 mm |
Setting your board
Wooden top
The Mikado foot is equipped with 4 fixing plates, each drilled with 4 holes of 7 mm.
The fixing screws are supplied: all you have to do is position your top and screw it onto the base.
Stone top
We recommend gluing the top directly to the foot using suitable silicone.
Another solution is to glue plywood under the top, then screw the foot onto it.
Glass top
The foot is specially adapted to your top: the upper plates are replaced by solid surfaces, with no drilling.
You can thus install non-slip pads and then simply place your glass top on the base.
Protection of your floor
The Original foot is equipped with height-adjustable plastic feet adjustable in height. They allow you to easily adjust the levelling of your table, even on slightly uneven ground.
They also create a protection between the base and your floor, to preserve your tiles or parquet and to facilitate moving the table without risk of scratches.
Finishes and colours
Raw steel
Without paint or varnish, steel retains its natural appearance, with shades ranging from dark grey to midnight blue. Marks, scratches or colour variations may be visible: they are an integral part of the authentic appearance of raw steel.
Raw steel varnished
This finish preserves the natural appearance of raw steel whilst providing it with protection. A transparent matt varnish is applied in order to prevent corrosion from appearing and to preserve the appearance of the base over time.
Powder coating (paint)
The base is covered with a powder paint in the colour of your choice, then placed in an oven to create a uniform, slightly textured and extremely durable coating. This finish offers excellent durability over time and makes the base easy to maintain.
RAL of your choice
Would you like a particular colour? Select this option and then tell us the desired RAL reference when placing your order. Examples: RAL 7033, RAL 7021, RAL 2100…
Delivery
Your base is carefully protected and packaged on a pallet to ensure transport under the best conditions.
Once ready, it is entrusted to our carrier, who will contact you to arrange a delivery appointment.
Your base is delivered directly to the address you provided when placing your order.
A question?
If you would like custom dimensions, simply contact us.
In the presentation photos, the top measures 200x100cm, it is supported by our Original foot Version 2.
Testimonials
