100% French Product
Spider – Foot for dining table
from
339,00 €
You already have your top and all you need is the table base? The Spider is made for you. Its steel tubes are shaped and assembled by hand in our workshop near Angers to form a sturdy base, delivered fully welded.
All specificationsEverything you need to know
Learn more about your product
Handmade in our workshop
At Nalunes, every Spider leg is cut, adjusted and welded by hand in our workshop, near Angers. We have chosen demanding manufacturing: thick steel, careful welds and robust assemblies, for a leg base designed to last.
A design that hides real workshop craftsmanship
The Spider looks simple: tubes that intertwine. In reality, it is one of the most demanding legs to manufacture. Each tube is cut at the exact angle, positioned with precision then welded so that the whole falls perfectly square.
This care, almost invisible once the leg is finished, makes all the difference: your table remains stable, rigid and can support up to 300 kg, regardless of the version chosen.
A single piece, ready to install
The Spider is entirely welded: you receive it in one solid block, with no assembly required. No screws to tighten, no instructions: all you have to do is install your tabletop.
It is compatible with rectangular or oval tabletops, in wood, stone or glass.
Are you looking for a Spider leg for a coffee table? Discover our dedicated version here.
Dimensions
What length should you choose?
Choose the length of your Spider foot based on the dimensions of your worktop.
| Worktop length | Foot length |
|---|---|
| Up to 190 cm | 130 cm |
| 195 to 220 cm | 150 cm |
| 225 to 250 cm | 180 cm |
| 255 to 300 cm | 200 cm |
What width should you choose?
| Worktop width | Recommended foot width |
|---|---|
| 80 to 95 cm | 70 cm |
| Over 95 cm | 80 cm |
What height should you choose?
A finished dining table (foot + worktop) should measure between 75 and 77 cm.
| Worktop thickness | Recommended foot height |
|---|---|
| 20 to 30 mm | 73 cm |
| 30 to 60 mm | 71 cm (standard) |
| 60 to 80 mm | 69 cm |
| Over 80 mm | 67 cm |
What steel section should you choose?
The steel section primarily influences the style and visual presence of the frame. It has no impact on the weight supported by the frame.
| Worktop dimension | Recommended steel section |
|---|---|
| Up to 170 cm | 60 × 60 or 80 × 80 mm |
| 180 to 250 cm | 80 × 80 mm |
| Over 250 cm | 100 × 100 mm |
These are our recommendations for a balanced result, but nothing prevents you from choosing an 80 × 80 mm section with a worktop of over 250 cm: you will simply get a more airy and lighter finish than with a 100 × 100 mm tube.
Fixing your top
Wooden top
The Spider foot is equipped with 4 mounting plates, each drilled with 4 holes of 7 mm.
The fixing screws are supplied: all you need to do is position your top and screw it onto the frame.
Stone top
We recommend gluing the top directly to the foot using a suitable silicone.
Another solution is to glue plywood under the top, then screw the foot onto it.
Glass top
The foot is specially adapted to your top: the upper plates are replaced by solid surfaces, undrilled.
You can then install anti-slip pads and simply place your glass top on the frame.
Protection of your floor
The Spider foot is equipped with height-adjustable plastic pads adjustable in height. They allow you to easily adjust the levelling of your table, even on slightly uneven ground.
They also create protection between the base and your floor, to preserve your tiles or parquet and make it easier to move the table without risk of scratches.
Finishes and colours
Raw steel
Without paint or varnish, steel retains its natural appearance, with shades ranging from dark grey to midnight blue. Marks, scratches or colour variations may be visible: they are an integral part of the authentic appearance of raw steel.
Raw steel varnished
This finish preserves the natural appearance of raw steel whilst providing protection. A clear matt varnish is applied to prevent corrosion and preserve the appearance of the base over time.
Powder coating (paint)
The base is covered with powder paint in the colour of your choice, then placed in an oven to create a uniform, slightly textured and highly resistant coating. This finish offers excellent durability over time and makes the base easy to maintain.
RAL of your choice
Would you like a particular colour? Select this option and provide us with the desired RAL reference when placing your order. Examples: RAL 7033, RAL 7021, RAL 2100…
Delivery
Your base is carefully protected and packaged on a pallet to ensure transport in the best possible conditions.
Once ready, it is entrusted to our carrier, who will contact you to arrange a delivery appointment.
Your base is delivered directly to the address provided when placing your order.
Custom-made & advice
If you would like a custom size, simply contact us.
In the presentation photos, this is a spider in a 60x60mm tube, dimensions 130x80cm with a platform measuring 200x100cm.
Testimonials
