100% French Product
Spider – Foot for round or square dining table
from
339,00 €
You already have a tabletop and you are only looking for a table base? You are in the right place!
Chic and stylish, the spider table base will restore all its elegance to your tabletop.
All specificationsEverything you need to know
Learn more about your product
Handmade in our workshop
At Nalunes, each Spider base is cut, adjusted and welded by hand in our workshop, near Angers. We have chosen to pursue demanding manufacturing: thick steel, careful welds and robust assemblies, for a base designed to last.
A design that hides real workshop craftsmanship
The Spider appears simple: tubes that intertwine. In reality, it is one of the most demanding bases to manufacture. Each tube is cut at the exact angle, positioned with precision then welded so that everything falls perfectly plumb.
This care, almost invisible once the base is finished, makes all the difference: your table remains stable, rigid and can support up to 300 kg, regardless of the version chosen.
A single unit, ready to install
The Spider is entirely welded: you receive it in one single block, with no assembly required. No bolts to tighten, no instructions: all you have left to do is install your tabletop.
It is compatible with round or square tops, in wood, stone or glass.
Are you looking for a Spider base for a coffee table? Discover our dedicated version here.
Dimension
Which dimension to choose?
Choose the dimension of your Spider base according to the dimensions of your tabletop.
| Tabletop diameter | Base dimension |
|---|---|
| Up to 140 cm | 80×80 cm |
| From 150 to 170 cm | 100×100 cm |
| From 180 to 200 cm | 120×120 cm |
Which height to choose?
A finished dining table (base + tabletop) should measure between 75 and 77 cm.
| Tabletop thickness | Recommended base height |
|---|---|
| From 20 to 30 mm | 73 cm |
| From 30 to 60 mm | 71 cm (standard) |
| From 60 to 80 mm | 69 cm |
| More than 80 mm | 67 cm |
Which steel section to choose?
The steel section primarily influences the style and visual presence of the base frame. It has no impact on the weight supported by the base frame.
| Tabletop diameter | Recommended steel section |
|---|---|
| Up to 130 cm | 60 × 60 mm or 80 x 80 mm |
| From 140 to 160 cm | 80 × 80 mm |
| More than 160 cm | 100 × 100 mm |
These are our recommendations to achieve a balanced result, but nothing prevents you from choosing a 100 × 100 mm section with a tabletop of less than 160 cm in diameter: you will simply get a more massive appearance than with an 80 × 80 mm tube.
Setting your board
Wooden top
The Spider foot is equipped with 4 fixing plates, each drilled with 4 holes of 7 mm.
The fixing screws are supplied: all you need to do is position your top and screw it onto the base.
Stone top
We recommend gluing the top directly to the foot using suitable silicone.
Another solution is to glue plywood under the top, then screw the foot onto it.
Glass top
The foot is specially adapted to your top: the upper plates are replaced by solid surfaces, without drilling and the reinforcement on top of the foot will be removed.
You can then install non-slip pads and simply place your glass top on the base.
Protection of your floor
The Spider foot is equipped with height-adjustable plastic pads adjustable in height. They allow you to easily adjust the levelling of your table, even on slightly uneven ground.
They also create protection between the base and your floor, to preserve your tiles or parquet and to make it easier to move the table without risk of scratches.
Finishes and colours
Raw steel
Without paint or varnish, steel retains its natural appearance, with shades ranging from dark grey to midnight blue. Marks, scratches or colour variations may be visible: they are an integral part of the authentic appearance of raw steel.
Raw steel varnished
This finish retains the natural appearance of raw steel whilst providing it with protection. A clear matt varnish is applied in order to prevent the appearance of corrosion and preserve the appearance of the base over time.
Powder coating (paint)
The base is covered with powder paint in the colour of your choice, then placed in an oven to create a uniform, slightly textured and highly resistant coating. This finish offers excellent durability over time and makes maintenance of the base easier.
RAL of your choice
Would you like a particular colour? Select this option and provide us with the desired RAL reference when placing your order. Examples: RAL 7033, RAL 7021, RAL 2100…
Delivery
Your base is carefully protected and packaged on a pallet to ensure transport in the best conditions.
Once ready, it is entrusted to our carrier, who will contact you to arrange a delivery appointment.
Your base is delivered directly to the address you provided when placing your order.
Made to measure & advice
If you would like a custom size, simply contact us.
– In the first 4 presentation photos, this is a spider in 60x60mm tube with 80x80cm dimensions.
– In the last photo this is a spider in 60x60mm tube with 130x80cm dimensions with a 200x100cm top.
Testimonials
